Self-clinching flush head studs
Contact our teams on +33 (0)2 41 22 99 20
SELF-CLINCHING FLUSH HEAD STUDS – IPFH
NOTES
The following installation panel material hardness limitations apply when installing Self Clinching Studs.
Steel Clinch Studs: 80 HRB Max,
300 Series Stainless Steel Clinch Studs: 70 HRB Max,
400 Series Stainless Steel Clinch Studs: 92 HRB Max (A special anvil is recommended for a proper installation), Aluminum Clinch Studs: 50 HRB Max.
IPFH
Thread and pitch | D +/- 0.4 | H Max | Min Sheet | Hole Size | Min Distance to edge of Sheet |
M3 x 0.5 | 4,6 | 2,1 | 1,0 | 3,0 | 5,6 |
M3.5 x 0.6 | 5,3 | 2,2 | 1,0 | 3,5 | 6,4 |
M4 x 0.7 | 5,9 | 2,4 | 1,0 | 4,0 | 7,2 |
M5 x 0.8 | 6,5 | 2,7 | 1,0 | 5,0 | 7,2 |
M6 x 1.0 | 8,2 | 3,0 | 1,6 | 6,0 | 7,9 |
M8 x 1.25 | 9,6 | 3,7 | 2,4 | 8,0 | 9,0 |
STANDARDS LENGTHS
Thread and pitch | Length +/- 0.4 |
M3 | 6 – 8 – 10 – 12 – 15 – 18 – 20 – 25 – 30 |
M3.5 | 6 – 8 – 10 – 12 – 15 – 18 – 20 – 25 |
M4 | 6 – 8 – 10 – 12 – 15 – 18 – 20 – 25 – 30 |
M5 | 8 – 10 – 12 – 15 – 18 – 20 – 25 – 30 – 35 |
M6 | 10 – 12 – 15 – 18 – 20 – 25 – 30 – 35 |
M8 | 10 – 12 – 15 – 18 – 20 – 25 – 30 – 35 – 40 |
MATERIALS AND PLATING
– Carbon Steel
– 300 series Stainless Steel
– Zinc
– Plain
