Self-tapping inserts three holes
Contact our teams on +33 (0)2 41 22 99 20
SELF-TAPPING INSERTS THREE HOLES – ISCT-3H/IHSCT-3H
NOTES
When installing self-tapping inserts with slot into hard plastics, the slot may crush and the screw gets locked. This can be avoided by using the ISCT-3H. During installation the force is distributed over the three cutting edges giving a very precise positioning. The SCT-3H installs into non threaded hole into plastics, composites, metals, alloys.. The headed version IHSCT63H provides higher torque out forces due to the enlarged surface. Possibility to supply with hex drive for easier installation.
ISCT-3H/IHSCT-3H
Thread |
Ext. Thread (E) |
Length (B) |
Head
|
Head Dia.
|
Hole Depth |
Rec. Hole
|
M3 x 0.5 |
5 x 0.6 |
4 – 6 |
N/A |
N/A |
6 – 8 |
4,6 – 4,8 |
M3.5 x 0.6 |
6 x 0.8 |
5 – 8 |
N/A |
N/A |
7 – 10 |
5,5 – 5,7 |
M4 x 0.7 |
6.5 x 0.8 |
6 – 8 |
N/A |
N/A |
8 – 10 |
6,0 – 6,2 |
M5 x 0.8 |
8 x 1 |
7 – 10 |
1 |
11 |
9 – 13 |
7,4 – 7,7 |
M6 x 1.0 |
10 x 1.25 |
8 – 12 |
1.5 |
13 |
10 – 15 |
9,3 – 9,6 |
M8 x 1.25 |
12 x 1.5 |
9 – 14 |
1.5 |
15 |
11 – 17 |
11,1 – 11,5 |
M10 x 1.5 |
14 x 1.5 |
10 – 18 |
1.5 |
17 |
13 – 22 |
13,1 – 13,5 |
M12 x 1.75 |
16 x 1.75 |
12 – 22 |
N/A |
N/A |
15 – 26 |
15,0 – 15,5 |
M14 x 2.0 |
18 x 2 |
14 – 24 |
N/A |
N/A |
17 – 28 |
17,0 – 17,5 |
M16 x 2.0 |
20 x 2 |
14 – 24 |
N/A |
N/A |
17 – 28 |
19,0 – 19,5 |
MATERIAL
– Steel, hardened, soft
– Stainless Steel